Industrial Concrete Floor Repair – Crack & Spall Repair Material
If your industrial concrete floor repair project needs a high strength epoxy patching mortar, Repox-Mix is your product!
REPOX-MIX is a three component 100% solids epoxy resin base compound. It provides high early strength with negligible shrinkage.
As a concrete floor repair mix, it cures hard yet not brittle. It bonds securely to concrete, metal, wood, brick, and other solid surfaces. REPOX-MIX is USDA approved for use in federally inspected meat and poultry plants. REPOX-MIX is a unique and complete premixed epoxy mortar. Usage is simple even under the most extreme conditions. When mixed, it provides a high strength patching mortar which can be featheredged.
REPOX-MIX is unique in its ability to bond to damp surfaces, and may be used outdoors or on slabs where it is difficult, if not impossible, to get the surfaces absolutely dry. Complete with aggregate, nothing else to add. Scientifically designed to fill in and resurface concrete, brick, metal, wood, and any other solid surface such as concrete curbing and concrete steps. It is a concrete floor and surface repair mix that can also be used for anchoring equipment, posts, meters, and signs.
Properties
| Mixing Ratio: | 2:1 (Liquid) + 3-5 parts aggregate |
| Color: | Part A (Clear) Part B (Gray) |
| Viscosity (Parts A& B Mixed): | Brookfield RV5/20 @ 75º F |
| Shelf Life: | One Year |
| Hardness: | Shore D-over 85 |
| Compressive Strength: | 14,000 psi |
| Tensile Strength: | 1,500 psi |
| Resistant To: | oil, kerosene, grease, water, gasoline, salts, mild inorganic acids and alkalis |
| Pot Life: | 60 minutes @ 60° F |
NOTE: Pot life is inversely proportionate to temperatures.
Application
Remove oil, grease, loose surface material, dust, and other foreign matter. Surfaces should be sound and dry. “V” out cracks. Cracks should be dry before use. Pour all of container B into container A. Mix A into Mix B. Use paint-type mechanical mixer when possible. Then put aggregate into mix, mixing thoroughly.
Apply mortar with a trowel or squeegee, smooth and finish. Clean tools with solvents such as methyl ethyl ketone or toluene.
USE PROTECTIVE GOGGLES AND GLOVES.
Caution
REPOX-MIX contains an alkaline amine. Avoid contact with skin and eyes. In case of contact with skin wash with soapy water. Flush eyes immediately with water and see doctor. If REPOX-MIX is used indoors provide adequate ventilation.
REPOX-MIX is also available in a chemically resistant formula where high acid or alkaline attack is present.
Capital industries is a leading supplier of industrial concrete floor repair products, servicing warehouses, commercial spaces and low-temperature storage areas for over 30 years. Contact us for information on this or any of our product lines at 631-298-6300.
